www.ruihui.net The 3-in-1 feeder uses a computerized NC control system for a more user-friendly design. It is suitable for feeding and correcting various metal sheets.
Designed for space saving and easy operation; suitable for continuous stamping processing of various hardware, electronics, electrical appliances, toys and auto parts, feeding correction, accurate and durable. The material roll device uses hydraulic expansion to feed the material into the die without manual feeding, saving labor and safety.
The use of the
3-in-1 feeder not only saves time and labor, but also greatly reduces labor intensity, and reduces labor costs and saves human resources. The operation of each auxiliary device is powered by oil pressure, air pressure or electricity. The reeling machine adopts cantilever type pressing material, motor transmission control, positive and negative rotation, and hydraulic cylinder holding iron ring, which is easy to operate, easy to maintain and low failure rate.
Instructions for handling 3 in 1 feeder:
1. Safety shoes should be worn to prevent people from being injured while carrying the feeder. Also, in order to avoid damage to the machine and parts in the collision of the wooden box, please use the crane or overweight machine to move from the bottom to move the machine.
2. When the car is in mobile use, you must first hook the chain or cable to the upper end of the machine, or use a crane to move the machine.
3. When the 3-in-1 feeder arrives, please check the quality and specifications of the machine. If there is any damage or other problems during transportation, please contact the company directly.
4. The crane or crane must be able to load the mechanical weight of the specification at least.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 |
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 |
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 |
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) |
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 |
| 0.6 |
| 0.8 |
| 1.0 |
| 1.2 |
| 1.4 |
| 1.6 | 470 | 470 |
| 1.8 | 400 | 400 |
| 2.0 | 360 | 360 |
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
