Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

Product Categories

Decoiler Straightener Feeder [223]
Coil Feeder Straightener [92]
Decoiler And Straightener [89]
Nc Servo Roll Feeder [79]
High Speed Feeder [50]
NC Leveler Feeder [47]
Metal Sheet Straightening Machine [52]
Decoiling And Straightening Machine [47]
Strip Straightener Machine [46]
Steel Plate Straightening Machine [42]
Steel Coil Uncoiler [70]
Sheet Metal Decoiler [70]

GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Now

Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

Name: Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line
Brand: RUIHUI
Price: 1 USD

Cheap Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line for sale

Brand Name : RUIHUI

Certification : CE, ISO certification

Place of Origin : Guangdong, China (Mainland)

MOQ : 1 Set

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 30 Sets Per Month

Delivery Time : 30 work days

Packaging Details : Wooden Box or Vacuum Packing

Model Number : MAC4-400

Condition : New

After-sales Service Provided : Field maintenance and repair service, Engineers available to service machinery overseas

Product name : NC Servo Feeder

Name : NC Servo Feeder

Stock width : 20-1000mm

Stock thickness : 0.3-3.2mm

Releasing Performance : -80

Motor : Yaskawa

Bearing : Japan NSK

Power : 3Phase 220V/380V/50HZ

Contact Now

Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

The servo feeder is an automatic device integrating digital, mechanical and pneumatic, and plays an important role in the high-end stamping industry.

The servo feeder is also a relatively sophisticated instrument. If it is used improperly or for a long time during use, it is easy to cause mechanical failure. The installation failures caused by the installation are mostly caused by external equipment failure.

Problem: The relaxation device does not smoothly cause an alarm;

Solution:
1. Check if the mold is internally defined as a guide pin, carefully check and correct.

2. Observe whether there is any deviation in the feeding direction, and then check if the working direction is correct and the mold is normal.

3. The eccentric shaft and the loose shaft are oil-dead, use kerosene and add butter.

Problem: Unstable feeding causes an alarm;

Solution:

1. check the mold for problems

2. Check whether the air pressure reaches 0.45kgf/cm3 under the condition that the feeder continuously presses normally;

3. Whether the delivery time is correct;

4. check whether the motor is normal (basic can rule out such cases);

Problem: The irregularity of the feeding causes the alarm;

Solution:

1. Check whether the pressure plate is evenly stressed. If it is uneven, adjust the pressure of the relaxation device.

2. Whether the feeding mechanism used is pneumatically relaxed, check whether the air compressor pressure is normal.

3. Check whether the coils fed into the material rack are on the same level as the feeder and mold.

Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

Specification:

Model	MAC2-400	MAC2-500	MAC2-600		MAC2-800
Stock Width(mm)	50-400	50-500	50-600		50-800
Stock Thickness(mm)	0.3~3.2	0.3-3.2	0.3-3.2		-3.2
Max.Coil Weight(kg)	3000	3000	3000	5000	5000	7000
Max.Coil O.D.(mm)	1200	1200	1200
Coil I.D.(mm)	8	8	508		508
Feed Length(mm)	~500*	~500*	~500*		~500*
Max. Line Speed(m/min)	16-24	16-24	16-24		16-24
Work Roll Number(pieces)	upper 6 lower 5	upper 6 lower 5	upper 6 lower 5		upper 6 lower 5
Feed Roll Number(set)	1	1	1		1
Main Motor(kw)	AC2.9	AC2.9	AC4.4		AC4.4
Mandrel Expansion	hydraulic	hydraulic	hydraulic		hydraulic
Reel Motor(kw)	1.5	1.5	1.5	2.2	2.2	3.7
Power(V)	3 Phase 220V/380V/50HZ
Operating Air(Mpa)	0.49	0.49	0.49		0.49

Straigtening performance:

tock Thicknees (mm)	Stock Width (mm)
0.3	400	500	600	800
0.4
0.6
0.8
1.0
1.2
1.4
1.6			470	470
1.8			400	400
2.0			360	360
2.3	300	300	300	300
2.5	230	230	230	230
2.8	150	150	150	150
3.2	110	110	110	110

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Product Tags:

sheet straightening machine

metal straightener

Automatic 3 Phase Coil Processing Servo Feeder for Auto Parts Stamping Coil Processing Line Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!